hairway Turbo X5 Handbuch Seite 8

Maintenance of the
1.
Push the blade out of
the machine, then use
the cleaning brush to
wipe off
among the blade. Lu-
bricating the space be-
tween the stationary and
the moving blades with
2 or 3 drops of oil .
2. Clean the blade after us-
ing every time in time.
When charging
Please don't charge if the
temperature is lower than
0°C or higher than 40°C.
Please don't charge if it is
nearby the sunlight perpen-
dicular incidence or the heat
source radiates.
The standard charging time
is 2 hours. In order to
avoid mangling the batter-
ies, please don't extend the
charging time.
blades
the scraps
8
Cleaning the housing using
only a cloth slightly damp-
ended water or a mild soap
solution.
Never use a caustic solution.
Never submerge the clipper
in water.
Keep away from the chil-
dren.
This clipper may become
warm during operating and/
or charging, this is normal.
When holding the clipper,
don't hold the power soft
line, in order to prevent pos-
sible harm to soft line and
so as to avoid accidents.
Never tamper with moving
parts.
Technic data
Rating voltage: 3,7 V
Charging time: 2 hours
This appliance is not intended
for use by persons (including
children) with reduced physi-
cal, sensory of mental capa-
bilities, or lack of experience
and knowledge, unless they
have been given supervision
or instruction concerning use
of the appliance by a person
responsible for their safety;
Childred should be super-
Cautions