Doperation; Ecleaning & Maintenance - CombiSteel 7465.0010 Gebrauchsanweisung

*Control Panel;
A
: STOP button
B
: START button
C
: URGENT STOP button
Operating;
Before first use, clean the outer surface of the appliance and table with moist cloth and dry.
For the tensioning adjustment ; Before each use, use the knob that on top of tension adjustment. Turn the
knob (+) direction to tension. Turn to opposite side (-) to loosen.
Adjust the distance between saw and thickness adjustment handle on stand by moving thickness adjustment
handle
Adjust the height by moving height adjustment handle.
Put on safety guard to the saw.
Plug in the appliance.
For operating the appliance be sure that URGENT STOP button must be unpressed and press the ON button ,
be sure that saw blade turns at clockwise.
Place the material that will be cut to the table and start cutting process.
When the operation is completed provide the main switch to be at (OFF) button and unplug the appliance.

CLEANING AND MAINTENANCE AFTER EVERY USE

Always turn off the appliance and disconnect from the power supply before cleaning.

The parts that contact with product must be cleaned after every use. The sawdust box must
be evacuated after every use.

Pay attention the cleaning materials that are used during the appliance's cleaning to be hygienic.

Do not use abrasive cleaning chemicals as these can leave harmful residues. Do not wash the
appliance with water during the cleaning.
D OPERATION
E CLEANING & MAINTENANCE
5