Gamko Maxiglass MG/150 series Gebrauchsanweisung Seite 20

c. Clean the magnetic door gasket.
d. Clear the air flow trenches.
e. Put the thermostat in warmest position so that the machine
f. Call your local Gamko distributor.
g. Call your local Gamko distributor.
Symptom: Temperature is too low with correctly set thermostat.
Cause: The thermostat is out of order.
Solution: Call your local Gamko distributor.
20
cuts off and wait till the evaporator is defrosted.
Turn the thermostat back in normal position.