General Safety Advice - Beper 40.993 Betriebsanleitung

GENERAL SAFETY ADVICE

READ THE OPERATING INSTRUCTIONS CAREFUL-
LY BEFORE FIRST USE OF THE APPLIANCE.
Read the following instructions carefully, since they
give you useful safety information about installation,
use and maintenance and help you avoid mishaps and
possible accidents.
Remove the packing and make sure that the appliance
is intact, with special attention to the supply cable. The
elements of the packing (plastic bags, polystyrene, etc)
do not have to be accessible to the children, in order to
preserve them from danger sources.
It is recommended not to throw these packing material
in the domestic waste, but to deliver them to the ap-
propriate station of collection or destruction refusals,
asking eventually information to the manager of the
Sanitation Department of your own municipality.
Before connecting the appliance make sure that the
mains voltage corresponds to the data specified on
the label.
If the plug does not suit the socket, let it be replaced
with another suitable plug by qualified personnel only,
which shall also ensure that the section of the socket
cables is suitable for your appliance power absorption.
Never pull the supply cord to unplug the appliance.
Make sure that the supply cord never comes into con-
tact with hot or cutting surfaces.
Do not use this appliance if the supply cord is dama-
ged. In case of damage, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
10