Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Caroger A5

  • Seite 4 CONTENTS English······························1-13 Deutsch··························14-25 Français··························26-36 Español··························37-48 Italiano····························49-60...
  • Seite 5 TO CUSTOMERS Thank you very much for using our two way radio. This radio of modern design is reasonable structure with stable functions. It is designed to meet different customers' need for high quality with easy operation and perfect capability. We believe you are pleased with its nice shape and excellent performance. CE Statement The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the CE exposure limits of this radio.
  • Seite 6: Using Tips

    (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
  • Seite 8 Battery Notice: 1. Please do not short-circuit the battery terminals or expose of in fire. Do not dissemble the battery by yourself. 2. Charge the battery between temperature 0°C and 45°C. The battery cannot be fully charged beyond this temperature range. 3.
  • Seite 9: Installing/Removing The Battery

    Charging precautions: 1) The battery is not fully charged in factory, please charge before using it. 2) Charge and discharge the battery for two or three times, the battery capacity will reach the best condition. When the battery capacity is low, please charge or change the battery.
  • Seite 11 2. Battery Save Function This function can be set by the software. Turn on this function can make the standby time longer. In the software: EN-7...
  • Seite 12 3. Scramble When the radio is allowed the scramble function, and press the key, TX voice will be sent out with scramble, other radio only received the signal when its scrambler also turns on. EN-8...
  • Seite 13 4. Busy Channel Lock You can turn on/off this function via software. A: if the current channel does not have CTCSS/DCS, when there is signal, TX prohibited when you press PTT. B: If the current channel does not have CTCSS/DCS, when there is signal which does not nave CTCSS/DCS, TX prohibited when you press PTT.
  • Seite 14 because of continuous transmission, If the transmitting time exceeds the TOT pre-set time, the radio will sound "Du". 10. Power protection function When the radio is in normal use or maintenance, the transmission will be prohibited if the working voltage is beyond the normal supplying voltage.
  • Seite 15: Troubleshooting Guide

    V. Related problem solving When reading or PC programming of Walkie talkie long time no response or a communication error? 1. Check the programming cable to find if it is damaged 2. Check whether the programming cable with computer serial port or Walkie talkie interface is bad or loose 3.
  • Seite 16: Specifications

    CE(PMR) CH.NO Freq.(MHz) CTCSS/DCS CH.NO Freq.(MHz) CTCSS/DCS 446.00625 0.5w 114.8 446.10625 0.5w D026N 446-01875 0.5w 114.8 446.11875 0.5w D026N 446.03125 0.5w 114.8 446.13125 0.5w D026N 446.04375 0.5w 114.8 446.14375 0.5w D026N 446.05625 0.5w 114.8 446.15625 0.5w D026N 446.06875 0.5w 114.8 446.16875 0.5w D026N...
  • Seite 17 Current 80mA(when standby) 220mA(when working) Audio response +7 ~-12.5dB Transmitter Frequency range PMR446/400~480MHz Output power 0.5W/2W Modulation mode 16KF¢3E Spurious radiation ≤7.5uW Modulation noise <-40dB Modulation distortion <5% Frequency Stability 5ppm Maximum deviation ≤ ±5KHz Current ≤ 2300mA Audio response(300-3000Hz) +6.5~-14dB Adjacent Ch.
  • Seite 18: Auspacken Und Uberprufen Des Lieferinhalts

    ZU KUNDEN Wir bedanken uns herzlich bei Ihnen dafur, dass Sie sich fur ein Funkgerat von entschieden haben. Dieses angebotene hochwertige Walkie Talkie verfugt uber wissenschaftliche Struktur und schickes Design. Es wird mit der einfachen Bedienung und stabilen Betriebsfahigkeit fur die verschiedenen Kundengruppen entwickelt.
  • Seite 19 Struktur erfahren Kanal-Taste Antenne Power/Lautstärke-Taste LED Indikator Lautsprecher Mikrofon PTT switch Press it to transmit, MIC/Lautsprecher-Buches release to receive Batterie DE-15...
  • Seite 20: Normale Aufladung

    Akku Benutzen Sie bitte die anderen Akku nicht die anderen Akkutyps könnten die Explosion verursachen und Menschen verletzen. Note: 1. Schließen Sie den Akku niemals kurz. Werfen sie ihn auf keinen Fall ins Feuer. 2. Bitte den Akku zwischen den Temperaturen 0°C - 45°C aufladen,es besteht die Möglichkeit,dass der Akku wegen der unstabilen oder extremen Temperatur nicht voll aufgeladet werden könnte.
  • Seite 21: Vorsicht Bei Dem Ladevorgang

    Wenn der Strom niedriger als der Einstellwert ist,wird die Anzeige am Anfang der Aufladung rot blinken,solange der Strom bei der Aufladung den Einstellwert erreicht,wird die Anzeige aufhören zu blinken und der Stromvorgang wird auch in den Normalen Zustand wechseln. Note: Ein blikender Zustand dauert höchstens nicht über 30 Minuten .sollte über 30 Minuten dauern,heißt es,dass der Akku nicht richtig aufgeladet wird, bitte kontrollieren Sie,ob der Akku richtig sitzt oder defekt ist.
  • Seite 23: Stromsparfunktion

    2. Stromsparfunktion Diese Funktion ist mithilfe der Software zu aktivieren. Sie wird verwendet, den Strom zu sparen und die Standby-Zeit zu verlängern. In der Software: DE-19...
  • Seite 24 3. Scramble Wenn die Scramble-Funktion aktiv ist, drücken Sie die Taste, damit die TX Stimme mit Scramble ausgesendet werden kann, nur die Funkgeräte , deren Scramble-Funktion auch aktiv ist,können das von Ihnen gesendete Signal empfangen. DE-20...
  • Seite 25: Busy Channel Lockout(Bcl)

    4. Busy Channel Lockout(BCL) BCL kann per Software ein- oder ausgeschaltet werden. Diese Funktion unterbindet ein Senden auf dem eingestellten Kanal, falls dort momentaner Funkverkehr stattfindet. Dadurch werden die aktiven Funkteilnehmer nicht gestört. Besonderen Sinn ergibt diese Funktion in Zusammenhang mit der Verwendung von CTCSS oder DCS, da der Kanal dann nur selektiv abgehört wird.
  • Seite 26: Betriebsprozess Des Programmierenden Funkgeräts

    Beschädigung wegen der kontinuierlichen Übertragung,sollte die Sendezeit die /oreingestellte Zeit überschreiten, wird das Walkie Talkie "DU" klingen. 10. Stromschutzfunktion Wenn das Funkgerät normal verwendet wird, wird die Übertragung verboten, wenn die Arbeitsspannung die normale Versorgungsspannung überschreitet. NiedrigeralsßVoderhöherals 5 V, wird die Übertragung auf hören, das Walkie Talkie kann nicht eingeschaltet werden,wenn die Arbeitsspannung mehrals 5V ist.
  • Seite 27: Mögliche Probleme Und Die Lösungen

    5. Beenden Sie die Programmiersoftware, schalten Sie das Funkgerät aus und trennen die Verbindung. V.Mögliche Probleme und die Lösungen Keine Verbindung zwischen programmierten Funkgeräten möglich: Woran könnte liegen, wenn keine Verbindung zwischen zwei Funkgeräten möglich ist, obwohl diese mit den identischen Einstellungen beschrieben wurden? 1.
  • Seite 28: Spezifikationen

    CE(PMR) Can. Freq.(MHz) CTCSS/DCS Can. Freq.(MHz) CTCSS/DCS 446.00625 0.5w 114.8 446.10625 0.5w D026N 446-01875 0.5w 114.8 446.11875 0.5w D026N 446.03125 0.5w 114.8 446.13125 0.5w D026N 446.04375 0.5w 114.8 446.14375 0.5w D026N 446.05625 0.5w 114.8 446.15625 0.5w D026N 446.06875 0.5w 114.8 446.16875 0.5w D026N...
  • Seite 29 Batteriekapazität 80mA(Stand by), 220mA(Betrieb) Audio Response +7 ~-12.5dB Sender Frequenzbereich PMR446/400~480MHz Ausgangsleistung 0.5W/2W Modulationsmodus 16KF¢3E Störstrahlung ≤ 7.5uW Modulationsrauschen < -40dB Modulationsverzerrung < 5% Frequenzstabilität 5ppm Die maximale Abweichung ≤ ±5KHz Batteriekapazität ≤ 2300mA Audio Response(300-3000Hz) +6.5~-14dB Selektivität ≥ 65dB Vermittlungs Empfindlichkeit 8~12mv Hinweis: Die Technische Daten könnte ohne Bescheid wegen technischer Änderung verbessert werden.
  • Seite 30 À Utilisateur Cher utilisateur, merci beaucoup d’acheter notre talkie-walkie. talkie-walkie moderne est de structure raisonnable et de fonctions stables. Il est désigné pour satisfaire les besoins de clients différents par l’utilisation facile et capacité parfaite. Nous croyons que vous serez satisfait de son apparence jolie et excellente performance.
  • Seite 32: Installation

    Recharge de Batterie Le voyant du chargeur est en rouge lors du recharge de batterie. Si le voyant rouge clignote, il signifie la batterie très faible, et en cours de recharge. Si le voyant rouge clignote toujours en 30 minutes, veuillez contrôler si la batterie est bien installée, ou la batterie ou le chargeur est défectueux.
  • Seite 34: Mode Économie D'énergie

    2. Mode économie d'énergie Vous pouvez activer cette fonction par la programmation. Lorsque l’appareil ni envoie ni reçoit pas et aucun opérations sont effectuées, le mode d'économie d'énergie sera activé après une période de 10 secondes. Quand une opération est faite, ou l’apparei reçoit des signaux, la mode est automatiquement annulée.
  • Seite 35 3. Brouilleur Quand la fonction de brouilleur est activée, seulem ent les talkie-walkies dont cette fonction est aussi activé peuvent recevoir les signais. FR-31...
  • Seite 36: Annonce Vocale

    4. Blocage de canal occupé (BCL) BCL fonction peut être activé / désactivé par le logiciel sur chaque canal. Lorsqu’il est activé, BCL vous empêche d'interférer avec d'autres qui pourraient utiliser le même canal que vous avez sélectionné. Après le BCL est activé dans quelque canal, quand vous appuyez sur le PTT dans ce canal, l’appareil émettra une tonalité d'alerte et de transmission seront inhibés (vous ne pouvez pas transmettre).
  • Seite 37 Préparation 1. Téléchargez le Driver de programmation et sélectionnez le Driver correspondant à votre propre systèmede l'ordinateur. 2. Installez le Driver de programmation(ou l'installez en exécutant le logiciel CD ). 3. Téléchargez et installez le logiciel de programmation (ou l'installez en exécutant le logiciel CD). 4.
  • Seite 38 Question et Réponse Troubles Solution Il n'y a pas d’alimentation. • La batterie est épuisée. Veuillez recharger et changer la batterie. • La batterie est installée inexacte.Veuillez retirer et installer de nouveau. Le temps d'opération devient court, même la capacité de la •...
  • Seite 39: Spécifications

    Spécifications Numéro de modèle Gamme de fréquences PMR446/400~480MHz Nombre de canaux Voltage de fonctionnement DC3.7V Température de fonctionnement -10°C~+50°C Antenne antenne à gain élevé Impédance d'antenne 50Ω Mode de fonctionnement Simplex Réception Gamme de fréquences PMR446/400~480MHz Sensibilité ≤ 0.2uV Bande passante occupée ≤...
  • Seite 40 Réponse audio (300-3000Hz) +6.5~-14dB Puissance de canal adjacent ≥65dB Sensibilité dintermédiation 8~12mv Note: Les spécifications seront révisées sans préavis en raison d'améliorations techniques. Merci. FR-36...
  • Seite 41: Accesorios Suministrados

    A los compradores Muchas gracias por usar nuestra radio. Esta radio del diseño moderno es estructura razonable con funciones estables. Está diseñado para satisfacer diferentes necesidades de los clientes de alta calidad con operación fácil y capablity perfecto. Creemos que usted está satisfecho con su funcionamiento excelente. Este manual es adecuado para walkie talkie.
  • Seite 43 Batería Jtilice la batería designada por ; Otras baterías pueden causar explosión y herir a la gente. Mata: 1. Por favor, no cortocircuite los terminales de la batería ni exponga al fuego. No desmonte el batería por sí mismo. 2. Cargue la batería entre la temperatura y 0°C y 45°C. La batería no se puede cargar completamente más allá de este rango de temperatura.
  • Seite 44 Indicador de carga normal Cuando cargue la batería, si la luz indicadora se pone roja, la batería está en a carga normal; Si la luz roja del indictor parpadea constantemente, la capacidad de la batería es demasiado baja, y está en la carga que gotea, y después de que la capacidad de la batería alcance un cierto nivel, cambiará...
  • Seite 46 2. Función de ahorro de batería Esta función puede ser ajustada por el software. Activar esta función puede hacer que el tiempo de espera sea más largo. En el software ES-42...
  • Seite 47 3. Scramble Cuando el walkie talkie activa la fucnión Scramble, al transmitir, puede recibir otro *adio que también activa la fucnión Scramble ES-43...
  • Seite 48 4. Bloqueo de canal ocupado Duede activar / desactivar esta función m ediante software. R:si el canal actual no tiene CTCSS / DCS, cuando hay señal, TX está prohibido al presionar PTT. B: Si el canal actual no tiene CTCSS / DCS, cuando hay una señal que no ¡ene CTCSS / DCS, TX está prohibido al presionar PTT. C: Si los canales actuales no tienen CTCSS / DCS, cuando hay una señal que iene CTYCSS / DCS, la radio transm itirá...
  • Seite 49 Cuando la radio está en uso normal o m antenim iento, la transm isión estará prohibida si la tensión de trabajo está más allá de la tensión de alim entación normal. Menor que 3V o más alto que 5V, la transm isión será prohibida. La 'adió no puede encenderse cuando es superior a 5V.
  • Seite 50: Problemas Y Soluciones Posibles

    • Confirme que el volumen de la radio es lo suficientemente alto • Confirme que las radios están encendidas y en buena tensión. • Confirme bien los radios conectados. • Confíeme el rango entre dos radios. El alcance máximo sería de 3km. Problemas y soluciones posibles Problema Solución...
  • Seite 51: Specifiche Tecniche

    CE(PMR) Can. Freq.(MHz) CTCSS/DCS Can. Freq.(MHz) CTCSS/DCS 446.00625 0.5w 114.8 446.10625 0.5w D026N 446-01875 0.5w 114.8 446.11875 0.5w D026N 446.03125 0.5w 114.8 446.13125 0.5w D026N 446.04375 0.5w 114.8 446.14375 0.5w D026N 446.05625 0.5w 114.8 446.15625 0.5w D026N 446.06875 0.5w 114.8 446.16875 0.5w D026N...
  • Seite 52 Stabilità di frequenza 5ppm Attuale 80mA(standby) 220mA(funzlone) Risposta audio +7 ~-12.5dB Trasmettitore Gamma di frequenze PMR446/400~480MHz Potenza uscita 0.5W/2W Modalità di modulazione 16KF¢3E Radiazioni spurie ≤ 7.5uW Rumore di modulazione < -40dB Distorsione di modulazione < 5% Stabilità di frequenza 5ppm Deviazione massima ≤...
  • Seite 53 Ai nostri clienti La ringrazio molto per aver utilizzato il nostro radio bidirezionale. Questa radio da un design moderno è la struttura ragionevole con funzione stabile. E’ stato progettato per soddisfare le esigenze dei nostri clienti per l’alta qualità con il funzionamento facile e la capacità perfetta. Riteniamo che siete soddisfatti con la sua bella forma e prestazioni eccellenti.
  • Seite 55 Batteria Si prega di utilizzare la batteria designato “”; altre batterie possono provocare esplosioni e ferire le persone. Avviso: 1. Per favore non cortocircuitare i terminali della batteria o esporre nel fuoco, non dissimulare la batteria da soli. 2. Caricare la batteria tra 0°C e 45°C. la batteria non può essere caricata completamente al di là di questo intervallo di temperatura. 3.
  • Seite 56 passa alla carica normale. Nota: Gocciolamento carica non supera i 30 minuti, se il rosso lampeggia spia dopo 30 minuti, significa che il caricabatterie non può caricare la batteria, si prega di verificare se la batteria o il caricabatterie è stato danneggiato. Installazione di accessori in dotazione Installazione Z rimozione della batteria 1.
  • Seite 58 2. Funzione risparmio batteria Questa funzione può essere impostata dal software, attivare questa funzione può rendere il tempo di attesa più lungo. Nel software: IT-54...
  • Seite 59 3. Funzione scrambler Quando la radio è consentita la funzione di scrambler, e premere il tasto, TX voce sarà inviato con scrambler, altra radio ha ricevuto solo il segnale quando il suo scrambler accende. IT-55...
  • Seite 60: Batteria Scarica

    4. Blocco canale occupato E’ possibile attivare / disattivare questa funzione tramite software. A: se il canale corrente non dispone CTCSS/DCS, quando non c'è il segnale, TX proibito quando si preme PTT. B: se il canale corrente non dispone CTCSS/DCS, quando non vi è segnale che non ha CTCSS/DCS, TX proibito quando si preme PTT. C: se il canale corrente non dispone CTCSS/DCS, quando non vi è...
  • Seite 61 alimentazione normale, inferiore a 3V o superiore a 5V la trasmissione sarà divieto, la radio non può accendersi quando è superiore a 5V. Processo d’operazione di scrittura frequenza I. Requisiti di sistema Sistema operativo: Windows 98, Windows ME, Windows XP, Windows Vista, Windows 7, Windows 8 Spazio su Hard Disk: Almeno 50 MB di disponibile.
  • Seite 62: Guida Alla Risoluzione Dei Problemi

    • Controllare per scoprire se la batteria walkie talkie è basso o fuori dal carica, se questo, si prega di sostituire la batteria o la ricarica della batteria; • Verificare se il software è compatibile con il modello attuale; • Controllare che l'impostazione della porta del software la frequenza di scrittura vengono assegnati alla porta USB del computer; •...
  • Seite 63: Especificaciones

    CE(PMR) Can. Freq.(MHz) CTCSS/DCS Can. Freq.(MHz) CTCSS/DCS 446.00625 0.5w 114.8 446.10625 0.5w D026N 446-01875 0.5w 114.8 446.11875 0.5w D026N 446.03125 0.5w 114.8 446.13125 0.5w D026N 446.04375 0.5w 114.8 446.14375 0.5w D026N 446.05625 0.5w 114.8 446.15625 0.5w D026N 446.06875 0.5w 114.8 446.16875 0.5w D026N...
  • Seite 64 Recepción de la corriente 80mA en espera/220mA en trabajo Respuesta de audio +7 ~-12.5dB Emisión Rango de frecuencia PMR446/400~480MHz Potencia de salida 0.5W/2W Modulación 16KF¢3E Radiación espuria ≤7.5uW Ruido modulada <-40dB Distorsión de la modulación <5% Tolerancia de frecuencia 5ppm Desviación máxima de frecuencia ≤...
  • Seite 65 Web: www.floureon.com E-mail: support@floureon.com MADE IN CHINA...
  • Seite 66 尺寸:168*150mm 纸张:封面105g铜版纸 内页80g书纸 印刷:单色印黑 封装方式:骑马钉...

Inhaltsverzeichnis