Quartz BATHROOM CLOCK
Overview
Back (inside):
1. Set the knob manually
2. Battery compartment
Commissioning:
1. Loosen the housing cover on the back of the unit.
To do so, turn the entire housing cover, a little to the left, and pull the cover off.
2. Insert the battery (type: 1.5 V, AA, LR06, Alkaline,) in the correct polarity into the battery
compartment and use the rotary knob to set the correct time.
3. Re-close the housing cover by placing it and turning it slightly to the right with slight pressure.
Indication of temperature:
After placing the battery, the temperature of the area is immediately indicated.
Declaration of conformity:
For the complete declaration of conformity to this product, please visit:
info @ mebus-group.de
1
ART.-NR. 41928/41964
12
MEBUS
EN
2