CO/Tech EMT1700-PC Bedienungsanleitung

Twilight switch with timer
Art.no 36-4488 Model EMT1700-PC
Please read the entire instruction manual before using the product
and save it for future reference. We reserve the right for any errors
in text or images and any necessary changes made to technical
data. If you have any questions regarding technical problems
please contact Customer Services.
Safety
• This product should only be repaired by qualified
service technicians.
• The product should not be taken apart or modified.
• Never let children play with the product.
• Make sure that the wall socket that the product is plugged
into is easily accessible as the only way to completely
disconnect the product from the mains is by unplugging it.
• The twlight switch is for indoor use only.
• Do not place the product in damp, dusty environments or
where there are strong vibrations.
• The PUSH button on the front of the twlight switch does
not disconnect the device plugged into it from the mains.
In order to completely disconnect the connected device
from the mains it must be unplugged from the twlight
switch.
Product description
Saves energy by switching your lights on when it is dark and
then off again when it becomes light. Can be used with
incandescent bulbs and energy saving bulbs.
GREAT BRITAIN • CUSTOMER SERVICE tel. 0845 300 9799 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.com/uk
Buttons and functions
1
1. Power - Indicates if the device is switched on or off.
2. Light sensor - Measures the light level.
3. Display - Shows the countdown and mode in
the following sequence: F 0 1 2 3 4 5 6 7 8 9 A d
4. PUSH - Push this button to set the programme time or
mode.
Setting the mode
1. Plug the appliance into a wall socket. "F" will appear on
the display to indicate that the appliance is turned off.
2. Press [ PUSH ] to select one of the programmes or modes.
2
Each press of the button will change the display to
the following:
3
0
Power on continuously.
Programme mode. The power will turn ON when it is
1-9 dark and stay on for the set number of hours (1–9).
4
Note! Since the sensor reacts to the difference bet-
ween light and dark, it can take up to an entire day
for the sensor to adjust to the light level.
A
Random mode. The power will turn ON when it is
dark and stay on for a random number of hours (1–9).
Continuous twilight switch mode. Works just like a
normal twilight switch. Turns on when the lux value
falls to 5–20 lux; turns off when the lux value rises over
100 lux.
Care and maintenance
Wipe the surface clean using a soft damp cloth. Never use
solvents or strong detergents.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.
Specifications
Rated voltage 230 V AC, 50 Hz, 16 A
Breaking capacity 230 V/16 A, 3680 W