oneConcept 10030302 Bedienungsanleitung Seite 5

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure
caused by ignoring the items and cautions mentioned in the operation and installation
instructions are not covered by our warranty and any liability.
Item number
Voltage rating
Power
Area
Characteristics
• Electric heating pad for indoor use only.
• Provides pleasant warmth in the foot area which supports relaxation and well being .
• Simply connect the Heating Pad to a normal 230 volt outlet
• Simply connect the Heating Pad to power supply.
• Pls check if the voltage of the Pad is suit for you before use it. V-14A is AC220-240V &
V-148 is AC110-120V.
• With Controller to adjust the temperature.
Operation
1. Press ON/OFF button to turn on it, the RED indicator will light. This is indicate the Pad is
in High temperature mode (about 60°C).
2. Press ON/OFF button again , the GREEN indicator will light.This is indicate the Pad is in
Medium temperature mode (about 50 °C).
3. Press ON/OFF button again , the BLUE indicator will light.This indicates the Pad is in Low
temperature mode (about 40 °C).
4. Press ON/OFF button again to turn off the Pad.This repeat cycle. You can use the button
to set the most comfortable temperature as you want.
Item
10030302
220-230 V~
75 W
60 x 40 cm
5