Installation - Mr Handsfree Blue Perfection Bedienungsanleitung

SYSTEM CABLES SC2 AND SC3
The system cable SC2 connects the handsfree unit with the power supply and the ignition system and is used for
muting the radio. The system cable SC3 is used for plug & play installation. It provides power supply via the cigarette
lighter.
Both system cables are supplied with changeable fuses. How to change the fuses is described in the picture below.

INSTALLATION

HANDSFREE UNIT (SM1)
We recommend mounting the handsfree unit at a less visible position in the car. However, make sure that the unit can
provide good acoustic, by directing the speaker towards the user and by placing the unit at a distance of more than 1 meter
from the microphone.
Search for a location in your car where the handsfree unit fits and where it is comfortable for use. Make sure that the location
in your car where you would like to install your handsfree unit is free from dust and dirt.
The bracket for the handsfree unit should be installed so that the handsfree unit slides into place and could be easily
removed if necessary.
The bracket can be fixed in 2 ways:
1. Immediately to the dashboard or to any other place in the car using the installation screws.
2. To the fixing plate using the installation screws. The fixing plate should then be fixed to the dashboard or to any
other place in the car by means of the double sided tape plate.
...........................................................................................................................................................................
GB - 6