Avacom PWRB-3-in-1 Bedienungsanleitung Seite 3

Rechargeable multi-purpose LED torch
EN
AVACOM Ain - User manual
Thank you for purchasing the product of AVACOM. Before its use, please,
read the following information carefully.
You are owners of a multi-purpose LED torch, camping light and
an emergency power bank. You can use it as a classic torch or, after
it's pulled out, as a camping light. Using the USB output port, you can charge
mobile phones and other small electronic devices.
Contents of the package
LED torch AVACOM Ain
USB cable / micro USB
Instructions for use
Product description
1. Main switch
2. Battery charge status indicator (blue LED)
3. Micro USB input
4. Charging indicator (red LED)
5. USB A output
6. Holding strap
7. LED torch
8. Camping light
Checking the battery charge status
Press the button (1) for checking of the battery charge status. If all blue LED
lights are on (2), the built-in battery charge status is 71–100%. 2 LED lights
stand for 31–70% charge. 1 LED light stands for 5–30% charge.
Charging of AVACOM Ain
Remove the silicon cover on the bottom part of the torch, and connect
a charger with the micro USB input port (3) or use the added USB cable
to connect the torch with a computer, or alternatively with a mains USB
charger adapter. When charging, the red indicator is on (4). When
the battery is charged, the red indicator goes off. The torch gets charged in
4–6 hours.
LED torch
Modes of luminosity: strong / normal / weak / flashing light
To switch the torch on, press the button (1) and keep it pressed for
3 seconds. The strong light comes on.
When the button (1) is pressed repeatedly in short intervals, the torch
switches between strong, normal, weak and flashing lights.
To switch the torch off, press the button (1) and keep it pressed for
3 seconds.
Camping light
To use the camping light (8), it is necessary to unscrew the top part of the
torch, where the holding strap is placed (6), and pull the lamp out from the
body of the torch. Modes of luminosity and their control are the same as with
the LED torch.
Function of the power bank
AVACOM Ain may, in case of need, serve to partially charge a mobile device.
Remove the silicon cover on the bottom part of the torch, and attach
the added cable with micro USB end piece, or other USB cable which suits
your mobile device, to the USB A output port (5). After connecting the device
that is to be charged, AVACOM Ain is automatically activated and starts
to charge the device. You can check the process of charging by way
of indicator on your mobile device.
User and safety instructions
Charge the torch before use.
The torch will reach its full capacity after having been charged 3–5 times.
Store the torch fully charged.
Do not throw into fire, do not expose for longer periods of time
to temperatures higher than 40 °C.
Do not place on car's dashboard. Heated dashboard may harm the built-in
battery.
The torch has intelligent protection functions against overcharging and over-
discharging, overvoltage, short circuit, etc.
The product is not a toy. Keep away from children.
Do not short circuit the torch, do not take it apart or change it mechanically
in any way.
Protect against dampness and liquids.
Use the torch only for purposes it has been designed for.
If AVACOM Ain does not work, consider the following possibilities
Check the charge status (see Checking the battery charge status).
If the torch gets automatically switched off, it needs to be charged (see
Charging of AVACOM Ain).
If the torch does not react to its being switched on, it needs to be charged
(see Charging of AVACOM Ain). Charge the battery for at least 2–3 hours
before repeating the attempt to start it.
Recycling
After the end of its life time, hand the product over to any waste collection site
for further recycling. Recycling symbols are shown directly on the product.
Technical specifications
LED luminance: 1 W / 140 lm
Li-Ion battery 3,7 V with capacity of 2200 mAh
Micro USB input: 5 V / 800 mA
USB A output: 5 V / 1 A
Aluminum body, surface of ABS plastic and silicon
Increased resistance against dampness and dust
Dimensions: 31,2 x 125 mm
Weight: 103 g
Made in China for AVACOM s.r.o.