Operation; Technical Information - Microlab B51 Bedienungsanleitung

Illustrations
EN
5
Power LED Power switch Volume Dial
Clamp to
LCD
frame edge
Mounting clamp
VOL
Connection
1. Mount the speaker to your LCD screen frame edge. Do this by
pressing the clamp to release the jaw and insert to sit firmly.
2. Release the clamp and it should sit firmly on the LCD.
3. Connect the USB type A plug to the notebook or USB Hub.
4. Connect the 3.5 mm stereo audio plug to the audio input jack of
the notebook or tablet.

Operation

1. Ensure the master volume is at the lowest setting.
2. Turn on the main notebook power or switch on the USB port.
3. Start the playback device and song.
4. Slowly adjust the volume to your preferred volume level and enjoy.

Technical Information

Amplifier
Output power:
Power distribution:
Harmonic distortion:
Signal/Noise ratio:
Speakers
Speaker driver:
Speaker rated power:
Interfaces
Output:
Input:
Power
USB:
4 Watt RMS
80 Hz - 18 kHz
< 5% 1 W 1 kHz
> 65 dB
1.5" x 2
3 Watt x 2 4 Ohm
NIL
3.5 mm stereo
500mA
EN
6