MINISTRY OF SOUND Audio S Plus Kurzanleitung Seite 2

EN Audio S Plus
Portable Bluetooth Speaker
1 Power Button
Press and hold until tone is heard to turn unit on/off.
2 Bluetooth
On 1st use your speaker is automatically ready to
pair with your Bluetooth® device.
On your device turn on Bluetooth and scan for
devices, select Audio S Plus from the menu.
To re-enter pairing mode stop streaming music and
wait until the Logo LED blinks blue on/off then press
the Pair button.
3 Volume Up
4 Volume Down
5 Logo LED
Flash blue equal on/off = ready to pair.
Flashes blue once every 2 seconds = not paired.
Flashes blue twice every 2 seconds = paired.
Amber = line in music player connected.
Blue fade on/off = Bluetooth connected and music
is streaming.
Flashing purple + ring tone = incoming call.
Solid purple = mute.
1 x flash purple = unmuted.
6 Removable Rubber Strap
Your speaker is splash proof with the rubber strap
in place. Swap to another colour strap or to attach
the stand.
7 Power and Battery Charge LED
Charging = blinking white.
Fully charged = solid white.
Medium charge = half white, half red.
Low charge = solid red.
Very low charge = flashing red.
Call/Speakerphone Mode
Short press button to answer and again to
2
end a call.
Press button and together to mute/unmute
3 4
voices during call.
Press and hold button to reject an incoming call.
2
1
2
5
3
4
6
7
8
7
6
6
1
2
5
3
4