Ring Automotive RAC620 Bedienungsanleitung Seite 3

Inflatable & Leisure Inflation
Select the suitable adapter and screw into the valve connector.
Adapters are clipped onto the rear of the compressor under the coiled power cable.
Insert the connector adapter into the appropriate inlet of the inflatable
Plug the 12v DC plug into the vehicle 12v socket. (Fig 1)
Push the ON/OFF button to switch the compressor on.
Caution:
Only inflate product to the manufacturer's specifications. Do not over inflate
Push the ON/ OFF button to switch the compressor off.
Remove adapter from the inflatable and remove adapter from the connector.
Replace the adaptor on the storage clip.
Typical Inflation Pressure (guide only)
Mountain bike tyres
Football
Volleyball
Conversion Chart (guide only)
psi KPa BAR
10 68.9 0.7
20 137.9 1.4
30 206.8 2.1
40 275.8 2.8
50 344.7 3.5
Specification Table
Power supply
Max Amperage
Pressure measurement range
Power cable length
Air hose length
Operation temperature
approved
Distributed by Ring Automotive Ltd, Gelderd Road, Leeds, England, LS12 6NA
Switch board +44 (0)113 2132000
+44 (0)113 2310266
autosales@ringautomotive.co.uk
35-50psi Road bike
13psi Basketball
5psi Lawn tractor tyre
psi KPa
70 482.6
80 551.6
90 620.5
100 689.5
125 861.9
12v DC
10 amps
0 – 100 psi
3m
480mm
-20˚C to +60˚C
Technical helpline +44 (0)113 2137339
www.ringautomotive.co.uk
90-100psi
9psi
22psi
BAR
4.8
5.5
6.2
6.9
8.6
Ring Automotive Ref:- L316