Herunterladen Diese Seite drucken
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Doorbell
Art.no 32-4829
Please read the entire instruction manual before using and save it for future use. We apologise for any
text or photo errors and any changes of technical data. If you have any questions concerning technical
problems please contact our Customer Service Department.
Description
• Two-tone chime.
• Battery or mains operated via the adaptor (not included).
• Requires 4 x C/R14 batteries or an adaptor, 6 V DC 800 mA.
• Comes with doorbell push button and 9 metres of bell wire.
Mounting the bell unit
1. Select a suitable location to install the doorbell.
2. Drill two horizontal holes in the chosen place. They should be 82 mm apart.
3. Remove the top part from the backplate. Screw the backplate onto the two holes using the supplied
screws. Make sure that the keyhole slots on the holes in the backplate are at the top.
4. Battery operation: Insert four batteries according to the markings on the backplate (+/-) and replace
the top cover.
5. Using the mains adaptor: Connect a mains adaptor, 6 V DC (max. 800 mA) to terminal 1 and 4 on
the backplate. The polarity (+/-) of the connection is not important.
6. When operating on batteries, the bell wire leading to the push button should be connected to
terminals 1 and 2 on the backplate of the bell unit. Wrap the stripped ends of the wire round
the thread and tighten the screw.
7. When operating from the mains adaptor the bell wire leading to the push button should be connected
to terminals 1 and 3 on the backplate of the bell unit. Wrap the stripped ends of the wire round
the thread and tighten the screw.
8. Lead the bell wire to the push button and connect the wires to the terminals on the push button.
If the bell wire needs to be shortened, cut it to the required length and strip off about 13 mm.
9. If you need to lengthen the bell wire make sure that you isolate all the cores to prevent short-circuiting.
10. Remove the cover from the doorbell's push button. Mount the unit in the desired place using two
screws. Replace the cover.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure about how to dispose of this product contact your municipality.
GREAT BRITAIN • CUSTOMER SERVICE
tel: 08545 300 9799 internet: www.clasohlson.com/uk
e-mail customerservice@clasohlson.co.uk
Model MD-102
loading

Inhaltszusammenfassung für Clas Ohlson MD-102

  • Seite 5: Beschreibung

    Klingel Art.Nr. 32-4829 Modell MD-102 Vor Inbetriebnahme die komplette Bedienungsanleitung durchlesen und aufbewahren. Irrtümer, Abweichungen und Änderungen behalten wir uns vor. Bei technischen Problemen oder anderen Fragen freut sich unser Kundenservice über eine Kontaktaufnahme. Beschreibung • Zweiton-Klingelsignal. • Wird mit Batterien bzw. Netzteil betrieben (separat erhältlich).