Whispbar K571W Fitting Kit Montageanleitung Seite 7

EN
Fitting Kit
K571W
It is important to put the pads in the correct
position on the vehicle.
Letters refer to the pad part numbers and
position.
Pad Part Number:
A = 11-04-233
B = 11-04-234
Ensure the fixed-point covers sit vertically
in the recess in the pads.
Place crossbars on pads ensuring the pads
fit into the holes underneath the foot and
the grubscrew passes through the hole in
the foot.
Repeat for all four positions.
Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
7