Power Supply - AKO -D14918 Bedienungsanleitung

Compatibility
Refer to the instruction manual of your equipment on its compatibility with the
AKO-D14918 programming key.
Connecting incompatible devices can permanently damage the key.
Wiring
IMPORTANT: Pay attention to
the orientation of the connector.
AKO-80018
(Optional)

Power supply

-If the controller is in operation (on-site programming), the key does not require an external
power supply (it is powered via the connecting cable).
-If the controller is NOT powered (workshop programming), the key requires a 12 Vdc/500
mA external power supply (AKO-80018 or equivalent).
AKO-D14918
5