Brother TD-4420TN Bedienungsanleitung

TD-4420TN/TD-4520TN
Product Safety Guide (English)
Thank you for purchasing the TD-4420TN/TD-4520TN (hereafter referred to as
"the product").
Be sure to read this document before using the product.
We recommend that you keep this document nearby for future reference.
• For servicing, adjustments, or repairs, contact Brother Customer Service or your
local Brother dealer.
• If the product operates abnormally or any error occurs, or if any cable is damaged,
turn off the product, disconnect all cables, and contact Brother Customer Service or
your local Brother dealer.
• We assume no responsibility for damages arising from earthquakes, fire, other
disasters, actions of third parties, the user's intentional or negligent operation,
misuse, or operation under other special conditions.
• We assume no responsibility for damage (such as losses, loss of business profits,
lost profits, business disruptions or a lost means of communication) that may result
from the use of, or inability to use, the product.
• We assume no responsibility for damages that may result from incorrect operation of
the product by connecting incompatible equipment or using incompatible software.
• We assume no responsibility for any damage or lost profit arising from the use of
labels created with this product, the disappearance or change of data due to failure,
repair or consumables and we do not accept any claim from a third party.
• Brother reserves the right to make changes without notice in the specifications and
materials contained herein. Furthermore, Brother shall not be responsible for any
damages (including consequential) caused by reliance on the materials presented,
including but not limited to typographical and other errors relating to the publications.
• For more information about software and using the product on a network, see the
User's Guide, which can be found on the Brother support website at
support.brother.com
• The latest version of your product documentation is available from the Brother
support website at support.brother.com
• The available models, accessories and supplies may vary depending on the country.
• This product is approved for use in the country of purchase only.
• The contents of this document are subject to change without notice.
WARNING
Failure to observe these guidelines and warnings could result in death or
serious injuries. Follow these guidelines to avoid the risk of heat or smoke
generation, explosion, fire, injury, or electrical shock.
Product, AC Adapter
• If a foreign object is accidentally inserted into any product opening, including slots,
connectors, and ports, stop using the product immediately, turn off the power, and
disconnect all cables. Be sure to remove any foreign objects before you turn on the
product.
• DO NOT use or store the product:
- Where it may come into contact with liquids
- Where condensation forms
D01818001
- Where there is a lot of dust
- Where the temperature or humidity are extreme:
- Operate in a location where the temperature is between 5 and 40 °C and the
humidity is between 25% and 85% (without condensation).
- Store in a location where the temperature is between -40 and 60 °C and the
humidity is between 10% and 90% (without condensation).
- Near flames or a heater
• DO NOT handle the plug with wet hands.
• DO NOT touch the AC Adapter and the product during a thunderstorm.
• DO NOT disassemble or alter the product.
• DO NOT pour chemicals or use combustible sprays on the product.
Examples of combustible sprays:
- Dust-removing cleaners
- Pesticides
- Disinfectants and deodorizers that contain alcohol
- Organic solvents or liquids such as alcohol
• Use and store the product, other components, and packing bags out of the reach
of children.
Before cleaning your Label Printer, disconnect the AC Power Cord from the AC power
outlet (electrical socket), otherwise an electrical shock may occur. For cleaning
methods, see the User's Guide.
AC Adapter
• Use only with the specified product.
• Insert the plug firmly into the AC power outlet (electrical socket).
• Use the AC Adapter with the standard AC power outlet (electrical socket)
(AC 100 − 240 V, 50/60 Hz).
• DO NOT allow metal objects to come into contact with the product's connectors,
ports, or metal AC Power Cord parts.
• DO NOT use the power supply plug (electrical plug) or AC Power Cord in a location
where it may get wet.
• To reduce the risk of fire, keep the power supply plug free from dirt or dust.
• DO NOT pull on the cord to remove the AC Adapter cord from a power outlet
(an electrical socket). Hold the plug to disconnect an Adapter from a power outlet
(an electrical socket).
• DO NOT damage, twist, severely bend, pull on, place objects on, pinch, or bind the
AC Adapter.
• DO NOT overload AC power outlets (electrical sockets).
CAUTION
Failure to observe instructions and warnings could result in minor or moderate
injuries.
Product
• DO NOT hold the product by the Roll Compartment Cover or the Roll Guide.
There is a risk that the Compartment Cover could detach or the product could fall.
• When connecting cables and accessories, follow the applicable instructions.
• DO NOT touch any metal parts near the print head. The print head becomes very
hot during use and remains very hot immediately after use. There is a risk of burns if
you touch it.
• DO NOT touch the sensor or print head with your bare hands as these parts may
get damaged or destroyed by static electricity. Before touching the sensor or print
head, place the product on an Electrostatic Discharge (ESD) grounding mat or use
antistatic gloves.
• Be careful when closing the Compartment Cover. There is a risk of injury if your
finger gets pinched between the upper and lower parts of the cover.
• DO NOT touch the print head. The print head becomes very hot and may cause
serious burns.
• DO NOT touch rotating parts. There is a risk of injury if your finger is caught in the
rotating gear. Turn off the product before touching the gear.
1
2
1 Print Head
2 Sensor
AC Adapter
Make sure you can always access the AC Adapter cord so that you can disconnect
it immediately in an emergency.
LAN Connection
DO NOT connect this product to a LAN connection that is subject to overvoltages.
General Precautions
Product, AC Adapter, or Accessories
• Observe all applicable regulations when disposing of these products.
• DO NOT remove the labels affixed to the product. These labels provide operational
information and indicate the product name and serial number.
• For more information about your model's power rating (electrical rating), see the
rating label attached to the base of your machine.
Declaration of Conformity (Europe/Turkey only)
We, Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561 Japan
declare that this product is in conformity with the essential requirements of all relevant
directives and regulations applied within the European Community.
The Declaration of Conformity (DoC) can be downloaded from the Brother support
website. Visit support.brother.com and:
■ select "Europe"
■ select your country
■ select "Manuals"
■ select your model
■ select "Declaration of Conformity"
■ click "Download"
Your Declaration will be downloaded as a PDF file.
Compilation and Publication Notice
Under the supervision of Brother Industries, Ltd., this guide has been compiled and
published covering the latest product's descriptions and specifications.
The contents of this guide and the specifications of this product are subject to change
without notice.
If updated versions of firmware, drivers or applications are released, this guide may
not accurately reflect these features.
Brother reserves the right to make changes without notice in the specifications and
materials contained herein and shall not be responsible for any damages (including
consequential) caused by reliance on the materials presented, including but not
limited to typographical and other errors relating to the publication.