Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Notices
Long Press the power button to Power On or Power
Off.Please remove the rubber protective cover before
using this tool.
Please make sure the camera is connected to the
monitor firmly and tightly, otherwise there will be
noisy image on the screen.
Please check the battery level if you can not power
on the device or there is noisy image on the screen.
This product comes with a TF card and it's already within
the device, you can press it to eject the TF card and use a card
reader to see or copy the photos and videos taken by the
endoscope.
Please notice that you can only take photos or record videos
when a TF card is inserted to the device, otherwise you can only
preview the video stream.
Insert card : Power off the device, open
the cover on the backside of the monitor
and insert the TF card according to this
chart.
powered off before operating the TF
card.
2. Please make sure the card is insert
correctly.
3. This device requires Class 10 high
speed TF card and it will not be able to
work properly with Class 4 low speed
card.
1. Please make sure the device is
~ ~
~ ~
03
Instructions for use
Micro SD
Micro
Card
Snap
USB
(Class 10)
Press the button to
unlockand adjust the
handle.
LED Torch
Time and Date
~ ~
04
Short press to
Up/Zoom
adjust LED
brightness of the
OK/Freeze Menu
Mode
camera
Down/Rotate
Long press to
power ON/OFF
1
2
LED Torch
On/Off switch
3
(Replace the battery
only when it reaches
the end of it's life or
it's broken)
Mode: Take Photo /Record Video
/Playback
Battery Status: Full/Middle/Low
/Empty
TF Card Status:
Card Plugged in
/ No Card
~ ~
Werbung
