Overmax Home Caldini Bedienungsanleitung Seite 4

Controller
Display
Temperature control key
ON/OFF switch
HOW TO USE
Switching on
1. Insert the plug into the power outlet. If necessary, use an extension cable to make sure
the cable is not tight.
2. Slide the on/off switch on the controller. The display will go on.
3. Press the temperature control key to set the heating level.
How to set temperature
Press the temperature control key to set the blanker heating level. There are three levels to choose
from. The level you have selected will be displayed.
When the level you have selected fl ashes on the display, the blanket heats up. When it stops
fl ashing, the blanket is warm enough and has a specifi c temperature. After the temperature has
dropped below the level for your power, the blanket will heat up again.
Timer
Press and hold the timer key to set a period after which the blanket will switch off . The remaining
time will be showed by the timer on the display.
Available variants: F (10 h), 8 h, 4 h and 2 h.
Once the period has expired, the controller will switch off .
Timer