Clas Ohlson Prowell Bedienungsanleitung

Prowell Cycle Helmet
Art.no 31-4970, 31-4971, 31-4972, 31-4973, 31-4974, 31-4975, 31-4976
Please read the entire instruction manual before using the product and SAVE IT FOR FUTURE REFERENCE.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact our customer services.
Safety
• This helmet is only designed for cycling, skateboarding or rollerblading.
Never use the helmet as protection when operating motor vehicles. Age: 8+.
• No helmet can entirely protect you and serious injuries can be sustained even when travelling at low speeds.
• This helmet is designed exclusively to protect the head and no other body part.
• In order to afford maximum protection for the user, the helmet must be worn correctly and all the straps must be used and tightened.
• The helmet can be damaged if it comes into contact with certain substances and the damage to the helmet might be difficult to see with
the naked eye.
• Cycle helmets should be replaced regularly because the material ageing could result in diminished protection.
• The helmet is designed to withstand just ONE heavy impact before it should be replaced.
• Be careful, use your common sense and obey the local traffic laws whenever you are out using your helmet.
• This helmet is not intended for playing children or for climbing, as there is risk of strangulation if the chin strap catches on something.
Product description
CE-marked in accordance with EN1078. Made of EPU foam with a full-cover shell which protects it from premature UV aging and other external
influences. Adjustable LW4D retention system for optimal fit. Ventilated air channels for dry comfort. 3M reflective tape, bike light helmet mount and
removable visor.
Use
A
1. Place the helmet on your head as shown in figure A.
Figure B shows how NOT to wear the helmet.
E
3. Adjust the strap shown in figure E and attach the buckle as in figure F.
4. Try the helmet on with the strap tightened and check for movement as in step 2.
5. If the helmet does not fit properly, choose another size.
Care and maintenance
• Never modify the helmet or its accessories.
• Do not decorate the helmet with stickers, they can weaken the plastic.
• Do not clean the helmet using solvent or abrasive cleaning agents.
• Do expose the helmet to prolonged heat or sunlight.
• Wash the helmet in warm soapy water.
• Inspect the helmet before each use. Throw the helmet away if you see any sign of damage.
• The helmet is designed to withstand just ONE heavy impact before it should be replaced.
Disposal
This product should be disposed of in accordance with local regulations. If you are unsure how to proceed, contact your local authority.
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk
and click on customer service.
B
F
C
2. In order to make sure that the helmet is seated correctly, move it
forwards, backwards and sideways. If the helmet is fitted correctly
it should hardly move at all. If necessary, adjust the fit of
the helmet harness using the adjustment screw (1).
D
1