Herunterladen Inhalt Inhalt Diese Seite drucken

US Blaster USB 7131 Bedienungsanleitung

Tragbare handliche audio-anlage
Verfügbare Sprachen

Verfügbare Sprachen

USB 7131
Portable handy audio system
Many thanks for purchasing this US Blaster product.
Always read the safety instructions below before letting a professional install this equipment.
MAGNETIC FIELD
CAUTION! Do not locate sensitive highgain equipment such as preamplifiers or tape decks directly
above or below the unit. Because this amplifier has a high power,it has a strong magnetic field
which can induce hum into unshielded devices that are located nearby. The field is strongest
just above and below the unit.Locate the amplifier(s) in the bottom of the rack and the preamplifier
or other sensitive equipment at the top.
CAUTION!
Risk of electric shock. Do not open.
To prevent electric shock do not remove top or bottom covers.No user serviceable parts inside.
Refer servicing to qualified servicing personnel.Disconnect power cord before removing back panel
cover to access gain switch.
WARNING
To reduce the risk of electric shock,do not expose this equipment to rain or moisture!
WATCH FOR THESE SYMBOLS
The exclamation point trian-
gle is used to alert the user
to important operating or
maintenance instructions.
© US Blaster Europe BV
The lighting bolt triangle is
used to alert the user to
the risk of electric shock.
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für US Blaster USB 7131

  • Seite 7 USB 7131 Tragbare handliche Audio-Anlage Vielen Dank, dass Sie dieses Produkt von US Blaster gekauft haben. Lesen Sie stets die fol- genden Sicherheitshinweise durch, bevor Sie einen Fachmann dieses Gerät einbauen lassen. MAGNETFELD VORSICHT! Stellen Sie keine empfindlichen High-Gain-Geräte wie Vorverstärker oder Kassettendecks direkt auf oder unter das Gerät.
  • Seite 8 Frequenzgang: 80 Hz – 20 kHz • Nennleistung: 60 W • Nominale Impedanz: 8 Ohm • Jeder Lautsprecher hat 1 Speakon- und 2 1/4"-Anschlussbuchsen • Das Gehäuse hat einen Griff und 2 Räder • Das Gehäuse hat eine Halterungsbohrung © US Blaster Europe BV...
  • Seite 9 © US Blaster Europe BV...
  • Seite 10 4. Ausgang des rechten Lautsprechers Eine 1/4"-Buchse (6,35 mm) zum Anschluss eines Lautsprechers mit mindestens 4 Ohm Impedanz. 5. Ausgang des linken Lautsprechers Eine 1/4"-Buchse (6,35 mm) zum Anschluss eines Lautsprechers mit mindestens 4 Ohm Impedanz. © US Blaster Europe BV...
  • Seite 11: Technische Daten

    1 Griff: Er erlaubt einen einfachen Transport. 2 Speakon: Ermöglicht den Eingang des Verstärkersignals. 3/4 Anschlussbuchsen: Ermöglicht den Eingang des Verstärkersignals. 5 Rad: Es erlaubt einen einfachen Transport. Im Lieferumfang enthalten 1. NETZKABEL 2. BEDIENUNGSANLEITUNG © US Blaster Europe BV...

Inhaltsverzeichnis