GeoMax Zenith25-Serie Kurzanleitung Seite 12

Step Description

Removing the microSD card while the instrument is turned on can
cause loss of data. Only remove the microSD card or unplug
connecting cables when the instrument is switched off.

The microSD card is inserted into a slot inside the battery compart-
ment of the instrument.
1. Push the slide fastener of the battery compartment in the direction
of the arrow with the open-lock symbol.
2. Remove the cover from the battery compartment.
3. Press the latch of the SIM/microSD card cover and remove the cover.
4. Slide the microSD card with the logo facing upwards firmly into the
slot until it clicks into position.
Operation
Zenith25 | 11