Kerio 1000-Serie Bedienungsanleitung Seite 2

Kerio Control Box 1000/3000 Series
1 Purpose
This document is a quick guide for safely installing and implementing Kerio Control Box 1000
and 3000 Series UTM appliances.
2 General Safety Instructions
During installation follow these security instructions:
• The appliance should be placed on a flat surface or securely mounted horizontally in rack
enclosure.
• Do not attempt to open or disassemble the appliance for any reason.
• Strictly follow the installation instructions (see section 4).
• Do not place the appliance near a heat source.
• Place the appliance in a ventilated space, making sure that the appliance fans and vents are
unobstructed at all times.
• Do not expose the appliance to liquids of any kind. In the event of liquid intrusion, unplug
the appliance immediately.
• Verify that the voltage and frequency of the power socket matches the values printed on
the power adapter before plugging in the appliance. Use only the power adapter supplied
with the appliance.
• Do not place any items on top of the power cable; keep the power cable away from walk-
ways or other areas where it could pose a tripping hazard.
3 Appliance Description
Kerio Control Box types:
• Kerio Control Box 1000 Series — Sub-1U table mountable appliance — see figure 1.
• Kerio Control Box 3000 Series — 1U rack mountable appliance — see figure 2.
Feature
Serial port
USB ports
Ethernet network ports
Figure 1 Kerio Control Box 1110 (back)
Figure 2 Kerio Control Box 3110 (front)
Used for connecting to a console with a serial cable
Input for USB devices
Used for connecting to the Internet and the LAN with an
Ethernet cable
Table 1 Kerio Control Box Features
2
Description