Installation; Operation - JAVAC RT-905 Sicherheitsanweisungen Und Bedienungsanleitung

EN
DIGITAL ALARM THERMOMETER
Measuring range
Display accuracy
Display resolution
Alarm setting resolution
Display reading update
Battery
Ambient temperature
FEATURES
• Wide measurement range
• Maximum / minimum temperature memory
• Celsius and Fahrenheit exchange
• Data hold function
• High / low temperature alarm setting
• Stainless steel probe
• Foldaway stand

INSTALLATION

01. Unpack the thermometer.
02. Pull out the battery cover.
03. Fully extend the probe cable.
04. Pull out the battery insulation strip.

OPERATION

01. As soon as the thermometer is switched on, it will perform a self test and show all display segments for
about 2 seconds and then display the measured temperature instantly.
02. Insert the probe into test substance about 25mm / 1" minimum; get the reading when it becomes stable.
SELECT TEMPERATURE UNIT
01. Press [°C/°F] to select temperature unit.
02. For option 3, press and hold [°C/°F] for about 3 seconds then release to change temperature unit.
1) -50 ~200 °C / -58 ~ 392 °F
2) -50 ~ 300 °C / -58 ~ 572 °F
±1°C between -19.9 ~ 119.9°C / ±1.8°F between -3.8°F ~ 247.8°F
±2°C between 120 ~ 119.9°C / ±3.6°F between 248°F ~ 391°F
±3°C for other ranges / ±5.4°F for other range
0.1° over full range
1° over full range (option 3 only)
1 second
1.5 volt, type AAA or equivalent x1 piece (included)
0 ~ 50 °C / 32 ~ 122°F
2