Usage Instructions; Normal Measurement - Hario V60 Drip Scale Bedienungsanleitung

ENGLISH
V60 Drip Scale
Thank you for purchasing this HARIO product.
Please be sure to read this instruction manual thoroughly in order to
use this product correctly.
After reading it, store it in a safe place for future reference.

Usage Instructions

● Normal Measurement
1 Press the "ON/OFF TARE" button to turn
the power on.
* Be sure to use the product on a flat,
stable surface where it cannot slip.
* When the "ON/OFF TARE" switch is
pressed, all of the text and marks are
shown in the display. "0.0g" is displayed
after approximately 3 seconds.
If a number other than "0.0g" appears in
the display, press the "ON/OFF" switch to
turn the power off and on again.
* Do not place anything on the weighing
platform when turning the power on.
2 Place an item on the weighing platform,
and the weight is shown in the display.
* Make sure that "0.0g" is displayed before
placing an item on the weighing platform.
* Place the item on the center of the weighing platform.
* The maximum weight display is 2000g. "EEEE" is displayed if
an item that exceeds the maximum weight is placed on the
scale.
3 Remove the item, and then press and hold the "ON/OFF TARE"
switch (approx. 1.5 seconds) to turn the power off.
● TARE (Subtracting the weight of the container)
1 Press the "ON/OFF TARE" switch to turn the power on.
2 Place a container on the weighing
platform, and the weight of the container is
shown in the display.
* Make sure that "0.0g" is displayed before
placing the container on the weighing
platform.
* Place the container on the center of the
weighing platform.
3 Press the "ON/OFF TARE" switch, and
"0.0g" is shown in the display.
After approx. 3 seconds.