Zero Setting - HOLOSUN HS 507C Anleitung

ZERO SETTING

First of all zero the weapon in combination with your
circle dot sight. On top of the sight is the elevation ad-
justment screw, the windage adjustment screw is on
the right side (see Fig. 6). Please use the enclosed tool
for zeroing adjustment.
1. Position the slot type screwdriver on the slotted
screw, then rotate the screw to right or left for ad­
justment. Each left or right click is for one adjust­
ment, equivalent to 0.5MOA value.
2. Rotating the elevation screw clockwise will elevate
the point of impact, rotating counter­clockwise will
lower the point of impact. Rotating the windage
screw clockwise will move the point of impact to
the left, rotating counter­clockwise will move it to
the right.
37