GRAVITY KS LTS 2 T Bedienungsanleitung

KS LTS 2 T
UTILITY SHELF FOR SECOND TIER KEYBOARD STAND ADD-ONS
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Gravity is a registered brand of the Adam Hall Group
®
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 | adamhall.com
FEATURES
• Utility shelf for keyboard stand extension arms 66 x 35.5 cm
• Convert your second tier add-on into a solid table
• Rigid steel construction
• 2 integrated 3/8" screws for mic clips, goosenecks and booms
• Great for tabletop synthesizers, laptops, controllers, drum machines,
effects etc.
Description
This steel shelf is designed to be placed on second tier keyboard stand
add-ons providing a flat surface for tabletop synthesizers, laptops, con-
trollers, drum machines, effect pedals and more. It features a front lip to
prevent items from falling off while two convenient 3/8" screws in the rear
corners allow you to mount microphone clips, goosenecks or boom arms.
The utility shelf's left and right edges are bent down 90° adding rigidity,
and two handle cutouts provide easy portability.
SPECIFICATIONS
Product number GKSLTS2T
Product type Stands and tripods
Type Keyboard stands
Material Steel
Surface Powder coated
Color Black
Decks 1
Max. support depth 400 mm
Support arm spacing 490 mm
adjustment range
Max height 300 mm
Width 660 mm
Depth 355 mm
Max load (support) 15 kg
Suitable for inner pipe 20 – 30 mm
diameter
Interchangeable rings 2 x 15 mm
Black ring pack Yes
included
Weight 3.8 kg