aTTo Digital nanoREC Bedienungsanleitungen Seite 5

you must put 03), hh - means 2 digit hour in the 24 hours format ( not
a.m. or p.m.) - ex. for the time clock 5 p.m. you must use the digit 17,
for 6 a.m. is 06, etc; mm - is 2 digit format for minutes and ss - is 2 digit
format for seconds.
Let's take for example how to create the format of date and time:
If today is 22 of May 2017, the time is 05:24 p.m. you must put in the
time.txt file the following digits: 20170522172400 (no spaces in front or
after these digits). After you insert these digits in the time.txt file save the
file, disconnect the recorder from the computer and when you will turn it
ON the device will automatically create audio files named after the time
and date when you start the device.
◆ Charging: Connect the USB cable to computer and to the nanoREC
voice recorder. When the red light blinks, it means charging, when fully
charged, the indicator light steady red. It can continue recording about 20
hours once fully recharged.
Note: If the indicator light becomes red and blinking during recording,
it means the battery is low; please stop recording and charge the device.
FAQ
1. How do I play the recorded files?
The recorder stores the audio capture in .WAV files. Waveform
Audio File Format (WAVE, or more commonly known as WAV due to
aTTo Digital | website: www.atto-digital.com
4