Fault Diagnosis - Ferroli SUN G20 series Bedienungs-, Installations- Und Wartungsanleitung

SUN G20

Fault Diagnosis

After shutdown, the red light stays on.
In this condition, after pressing the unit's release button for at least 3 seconds, visual fault diagnosis is
activated (see fault tables).
On pressing the release button again for at least 3 seconds, interface fault diagnosis is activated .
During the check on the causes of the shutdown, the unit's outputs are turned off.
The burner stays off.
Press the release button for approximately 1 second to reset the unit and restart the burner.
36
Cod. 35442633 - 01/2007 (Rev. 00)