Switches - Scotsman C1448 Installations- Und Bedienungsanleitung

Switches

The panel in the front of the machine can be flipped
up to access two switches – on and off.
Status De-Scale
Power Water
•
To switch the machine OFF, push and
release the Off button. The machine will shut
off at the end of the next cycle.
•
To switch the machine ON, push and release
the On button. The machine will go through a
start up process and then resume ice
making.
Control Options
There are two optional, field installed controls that
can be on this machine.
•
Vari-Smart (KVS) Adjustable ice level control
•
SmartBoard (KSB) Advanced Feature control
Off
On
November 2006
Page 13
Air and Water Cooled User Manual
Adjustable ice level control
When this option is present there is an adjustment
post and an additional indicator light to the right of
the four indicator lights mentioned above. The
ultrasonic ice level control allows the use to control
the point that the ice machine will stop making ice
before the bin or dispenser is full. Reasons for this
include:
•
Seasonal changes in ice used
•
Planning to sanitize the bin
•
Faster turnover for fresher ice
•
Certain dispenser applications where
maximum ice level is not desired
Use of control
VariSmart Control Area
There are several positions the ice level can be set
to, including Off (knob and label indicators lined
up), where it fills the bin until the standard bin
control shuts the machine off. See the kit's
instructions for complete details.
Rotate the adjustment post to the desired ice level.
The machine will fill up to that level and when it
shuts off the indicator light next to the adjustment
post will be On.
Note: Ice will build up in the bin or dispenser at an
angle, the distances listed above will be from the
sensor to the top of the ice directly beneath it.
The actual distance between the highest point of
the ice may be closer or further away, depending
upon the angle of the ice.
C1448, C1848, C2148W
Bin
Full
Adjust Ice Level
02-4294-01 Rev. A.