Installation - Mediclinics SC0009 Anbringung Und Gebrauchsanweisung

INTRODUCTION
'Machflow' hair dryer family offers the technical features as follows:
-
It is a class I appliance, so it must be earthed
-
It is an effective hair dryer providing a very intense and strong beam of air
-
Air velocity is adjustable to achieve an optimum balance between the drying power and
noise level
-
After hooking the handle off, the dryer works until a maximum continuous running operation
time (T max = 60 s).
- It includes a universal high speed motor that is activated gradually to avoid the inertia of its
ignition torque and thus ensure a longer useful life of the hair dryer.

INSTALLATION

Removal of the casing.

The hair dryer is supplied with the casing fitted to the base without tightening (Figure 1).

Carefully remove the casing since it is connected to the base by a tab that joins the two
pieces (casing and base) at the rear (Figure 2).

Remove the casing keeping it at an angle at all times (Figure 3) until the upper tab is
completely withdrawn, taking care to:

not damage the internal components, in particular the electronic circuit,

not scratch or damage the LED sensor screen,

not damage the surface of the casing.
Fig. 1 Fig. 2 Fig. 3