Setting Up The Printer; Box Contents - Canon PIXMA TR4500 series Inbetriebnahme

Setting up the printer

1. Box Contents

•
Power cord
•
Setup CD-ROM
•
Safety and Important Information
•
Getting Started (this manual)
2. Removing Packing Materials
1
Remove and dispose of the packing materials
from the device.
•
Be sure to remove any orange tape.
2
Open the front cover and paper output cover.
a
3
Remove and dispose of the protective materials.
•
Pull the orange tape to remove the protective
material.
•
FINE cartridges
•
Modular cable
b
a
b
4
Close the paper output cover and front cover.
a
3. Turning on the Printer
1
Connect the power cord.
Important
•
• Place the printer so it is at least 5 cm away from the wall.
At this time, do not connect any other cables.
2
Press the ON button.
Important
If the following screen appears, press the ON button to turn off
the power, and redo the procedure from step 2 in "2. Removing
Packing Materials".
3
When the following screen appears, use the [
and ] buttons to select a language, and then
press the OK button.
b
Back
1