Assembly Instruction; Cleaning And Maintenance - Milly Mally SPEEDWAY 12" Gebrauchsanleitung

IMPORTANT! READ CAREFULLY
EN
PLEASE KEEP FOR FUTURE REFERENCE!

ASSEMBLY INSTRUCTION

WARNING! The product should be assembled by adults only.
Please follow the drawings (1-5).
WARNING! Seat height should be adjusted so that the child could touch the ground by whole feet!
WARNING
1) Toy intended for children from 3 to 6 years.
2) Parents / guardians shall take the responsibility to guide and supervise the child before and during the use of the bike
to ensure the safety of the child.
3) Protective equipment should be worn! Do not use in traffic. 27 kg max!
4) Use the bike for riding on flat surfaces
5) Do not use a bicycle when any part is damaged or are missing any parts.
6) Do not use spare parts other than those suggested by the producer.
7) Teach your child how to use the bike, how to balance, steer, and brake.
8) Before every ride, check that all parts are functioning properly and are properly tightened.
9) Do not use the bike on rough, bumpy, steep roads and near water.
10) In one time the bike can use only one child.
11) This bike never be towed by another vehicle or bicycle.
12) This bike can not be used to tow other vehicles.
13) Do not use the bike after dark or when visibility is limited.
14) Children should always keep both hands on the steering wheel.
15) The toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
16) This toy has no brake.

CLEANING AND MAINTENANCE

1) Keep your bike clean. Dirt should be removed with a soft sponge, often flushed with water and detergent, wipe dry.
2) Check the condition of the tires, if it is cracked or heavily worn, be sure to replace them, so as not to endanger the safety of
the child. Maximum tire pressure is indicated on the sidewall of the tire.
3) Check the status of all the fixing screw connections with different mechanisms of the bicycle frame, and in particular wheels.
4) Store the bicycle in dry place. In case it gets wet, clean the bicycle thoroughly using dry cloth in order to prevent corrosion.