Troubleshooting; Specifications - Clean Air Optima Ambiente AD-301 Gebrauchsanweisung

Troubleshooting

The following is a troubling shooting guide to help you solve any issues that you may have
using the Clean Air Optima Aroma Diffuser Ambiente AD-301.
Device does not
switch on
Power is on (yellow
light flashed once)
but no mist
WARNING!
If the above recommended solutions do not work, please contact Clean Air Optima technical
support at the telephone number for your region. Do not attempt to disassemble, reassemble
or repair the device as this may void the warranty.

Specifications

Model
Rated voltage
Rated power
Capacity
Sound level
Dimensions
Weight
Colour
Complies with
EU regulations
1. Does the USB cable and the power supply body connect
correctly?
Solution: make sure that the USB cable get through with power
supply body. To verify it, pull out the USB cable, and
re-plug it again.
1. Check if the water level is above the minimum water level.
Solution: add more water. The water level should remain below the
Max water level line, otherwise it will cause irregular mist.
2. Is there any dirt on the ultrasonic atomizer plate?
Solution: clean the atomizer plate. (see point 3. of the
''Maintenance section'').
3. Check the Mist outlet to see whether it is blocked.
Solution: clean the inside part of the mist outlet with a cotton
stick (See point 4. of the "Maintenance" section).
4. Check if there is dust in the air-inlet.
Solution: clean the air-inlet.
The airflow will decrease considerably if there is too
much dust in the air-inlet, meaning there is insufficient
pressure to blow out the mist.
AD-301
USB Adapter 220V - 240V
5V 1A
Output:
5W
130ml - mist output 20ml/h
<25 dB(A)
106 x 106 x 160mm
282g
White
CE / WEEE / RoHS
Ask your retailer or your municipality
for updated information regarding
the disposal of the packaging and
of the device.
9