LOTRONIC AFX LIGHT PIXEL STRIP Bedienungsanleitung Seite 3

INSTRUCTIONS
Link Input DMX input DC input
The unit has one input and 2 outputs.
The in- and outputs are electrically isolated.
One DMX connector (3pin) accepts 4 individual channels
Each DMX output features an independent driver and DATA+ & DATA- LED indicator.
DMX input: Connect the signal coming from the DMX controller
DMX output: connect to the DMX receiving device
Don't connect more than 31 units between the DMX output of the controller and the DMX distributor.
Don't connect more than 32 units on one output of the DMX distributor.
Specifications
Power supply ........................................................... Mains adaptor IN: 100-240Vac 50/60H
............................................................................................................ OUT: 9-12Vdc 400mA
Dimensions ................................................................................................ 80 x 30 x 105mm
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed.
©Copyright LOTRONIC 2018
DMX outputs
PIXSTRIP-C Page 2