GreatGadgets Candy Grabber Bedienungsanleitung

English
Features
Miniature fairground favourite
For sweets, nuts and small prizes
Content has to be lifted with the claw
Three joysticks to move the claw
Uses plastic tokens and real money
Plays for one minute upon inserting a coin
Plays fairground music and applause upon picking up a prize
Requires three type D batteries (mono) which are not included
How to get started
1. Remove the Fairground Candy Grabber from the
packaging and take it out of the plastic wrapping.
2. Carefully place the device on a flat surface
(e.g. table). The battery case, the coin compart-
ment and the ON/OFF switch are located under-
neath the grabber.
3. Open the battery case using a small screw
driver (see picture A) and insert three type D
batteries (mono). Please ensure the " + " & " - "
polarities are correct.
Close the battery case and tighten up the screws.
4.
5. Place the Fairground Candy Grabber upright on
a flat surface.
Loading the prize compartment
1. To fill sweets etc. into the prize compartment
take off the cover located on the top of the candy
grabber as shown in picture B.
Fill sweets, nuts and prizes into the compartment.
2.
We recommend that all prizes are left in their
packaging and that they are clean and reasonably
small to guarantee proper functioning of the device.
Do not overfill the compartment because
3.
this can cause prizes to fall out. The plastic
guard around the chute is the maximum height
prizes should be filled up to.
4. Close the cover after filling the prize compartment.
Fairground Candy Grabber
Instruction manual
1