Specifications - Panasonic RP-SDZA64GAK Bedienungsanleitung

Handling and storage precautions
≥ This card is formatted to the SDXC memory card standard. If
reformatting is ever necessary, format it using SDXC
compatible equipment or SD formatting software compatible
with SDXC memory card. Formatting the card with any other
software will make the card non-standard and cause problems
with compatibility and performance. For a free version of SD
formatting software, visit Panasonic's homepage.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
≥ To use the card on one device after using it on another, perform
low-level formatting (overwrite-formatting) on the card before
using it on the new device. Performing low-level formatting
erases all data. If any data in the card is necessary, save the
data on a PC or other device before performing low-level
formatting.
≥ Do not use or store in locations directly exposed to sunlight, a
heat vent, or a heating appliance.
≥ Do not disassemble or remodel.
≥ Do not impact, bend, drop, or wet.
≥ Do not touch the metal terminals with your hands or metal
objects.
≥ Do not detach the label on the card.
≥ Do not attach other labels or stickers.
≥ Do not use this card in a location subjected to static electricity
or electrical noise. If the host device does not operate normally
due to the effects of static electricity on the card, then remove
the card from the host device and insert it again.
≥ Do not use or store in humid or dusty locations.
≥ Do not use or store in locations exposed to corrosive gases.
Protecting your data
≥ Switch the write-protect switch a to
"LOCK". Unlock when you want to record
or edit the card again.
≥ While data is being read or written, do not
remove the card or turn off any equipment
using the card. Do not remove the
batteries from battery-operated
equipment. These actions can cause data to be destroyed.
≥ Make backup copies of your data wherever possible.
Panasonic will not accept responsibility for any data loss, or
loss directly or indirectly caused by data loss.
Cautions about disposal or transferring
ownership of this card
≥ SDXC compatible equipment may contain the functions
"Format" and "Erase". However, in most cases all data on the
card will not be completely erased even after performing these
functions. When disposing or transferring ownership of the
card, we recommend using Panasonic formatting software
(http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html)
to completely erase all data from the card.
≥ When you dispose of the SDXC memory card, destroy it
physically or erase all data completely and follow your local
rules of separation and disposal of waste.

Specifications

Interface:
Clock frequency:
Operating voltage:
Dimensions (WtHtD): 24.0 mmk32.0 mmk2.1 mm
Mass (Weight):
Operating temperature:–25 oC to i85 oC

¢1 Video speed class 90, Minimum Transfer Rate above 90 MB/s
is sustained in condition of Video speed class.
¢2 UHS speed class 3. Minimum Transfer Rate above 30 MB/s
is sustained in condition of UHS speed class.
¢3 Minimum Transfer Rate above 10 MB/s is sustained in
condition of conventional SD speed class.
≥ Minimum Transfer Rate is based on our internal testing under
the condition defined by SD Association, and it may vary
depending upon host device and file size. The unit of Minimum
Transfer Rate [MB/s] indicates 1,000,000 bytes/s.
≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
≥ SDXC Logo is a trademark of SD-3C, LLC.
New standard SDXC memory card
interface (New ultra high speed UHS-II
interface, UHS-I interface and
conventional SD interface)
up to 50 MHz (conventional SD
Interface)
up to 100 MHz (UHS-I Interface,
SDR50)
up to 208 MHz (UHS-I Interface,
SDR104)
up to 52 MHz (UHS-II Interface,
FD156/HD312)
VDD1 2.7 V to 3.6 V
VDD2 1.7 V to 1.95 V
2 g
Supported Speed Class
UHS-II UHS-I
Interface Interface
¢1
Conventional SD
Interface
¢2 ¢3
3