Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly
1
The assembly requires 2 persons.
Frame assembly:
1. Stand the supports (B) upright. Hold the cross brace (C) in between the supports
(B). Turn the Allen screw (G) into the drilling holes of the support using the Allen key
(F). Repeat the steps for the other cross brace (K).
2. Now hold the mirror in place. The washers (J) go to the inner sides. Put the nuts on
the pegs (H). Screw the pegs (H) from the outside. Insert the key (G) into the keyhole.
8
Installation
2
Werbung
Inhaltsverzeichnis
