Intellinet 505895 Kurzanleitung Seite 3

Hard Drive
1
3
5
1 Remove the 4 screws from the chassis bottom.
2 Push the inner enclosure out to separate it from the outer chassis.
3 Set the first hard drive in the enclosure; connect the SATA and power cables.
4 Secure the drive using 2 screws on each side.
5 Using the tape provided, attach the thermal probe (black and white wire) to the first
hard drive. Choose a location between the two drives so the probe won't be damaged
during the installation of the second drive. Set the second hard drive in the enclosure;
connect the SATA and power cables.
6 Secure the drive using 2 screws on each side.
7 Reverse Steps 2 and 1.
CAUTION!
H ,
ANdle CArefUlly
As sOme edges mAy
.
be sHArp Or rOUgH
4
6
2
3
ENGLISH