Lechange F serie Kurzanleitung Seite 7

shows and put in the expansion bolts.
Step 2 Open the bracket and pull the power cable through the cable tray on the
bottom.
Step 3 Align the screw holes on the bracket to those on the mounting surface, then
put in and fasten the self-tapping screws.
Step 4 Attach the other half of the bracket to the device, then adjust the position of
the power cable and fix the bracket.
Disclaimer
- This quick start guide is for reference only. Minor difference might be found in
user interface.
- All the designs and software here are subject to change without prior written
notice.
- All trademarks and registered trademarks mentioned are the properties of their
respective owners.
- Please visit our website or contact your local service engineer for more
information.
- If there is any uncertainty or controversy, please refer to our final explanation.
4