Radio Operation; Clock Function - nedis DRWR1000GY Anleitung

RADIO OPERATION

1. Rotate the volume knob anti-clockwise to turn the radio on and adjust to
desired sound level.
2. Select the preferred frequency band (FM/MW/SW) by sliding the band
knob. The selected wave will appear on the display.
3. Rotate the tuning knob to tune to the desired station. The display shows
the frequency.
4. Adjust the antenna (see antennas).
5. Press power knob to turn off the radio.

CLOCK FUNCTION

1. Press the HOUR button as many times as necessary until the correct hour is
reached, while the TIME button is pressed.
2. Press the MINUTE button as many times as necessary until the correct
minute is reached, while the TIME button is pressed.
TO SET THE ALARM TIME
1. Turn radio off.
2. Press down the ALARM SET button, "AL: SET" will appear on the display
to identify the alarm time. While press the HOUR button as many times as
necessary until the correct hour is reached.
3. Press the MINUTE button as many times as necessary until the correct
minute is reached, while the ALARM SET button is pressed.
3
ENGLISH