Scanline MT4090 Gebrauchsanleitung

SCANLINE
TRAVEL MOBILE COLOR SCANNER FOR A4 DOCUMENTS
Key features
Color JPG/PDF scan selection
900/600/300 dpi scan selection
Directly save JPG/PDF fi les to the micro SD card
Support micro SD card up to 32GB
Driver free to download for Windows 7/Vista/XP and Mac OS10.4 or above
(directly plug-in, driver installation not required)
Functional parts
Part Function
1 Battery door For 2xAA alkaline batteries
2 Power/Scan Power On/Off : Press and hold this key for 2 seconds to turn power on or off . In power on mode,
press this button to start scan, press this button again to stop
3 Error LED indicator Overspeed: Red LED on
4 Scan LED indicator Ready for scan; Green LED on
5 LCD screen Scanning status display
6 Resolution Select High(900dpi)/Medium(600dpi/Low(300dpi) resolution; High/Medium/Low resolution
mode icon will be displayed on status LCD
7 JPG/PDF Select JPG/PDF scan, JPG/PDF mode icon will be displayed on status LCD
8 Time set Press to enter Time setting mode
9 USB interface Download scanned fi le to a computer via USB cable provided.
10 SD card slot micro SD card storage location.
11 Format button Press this button to format the micro SD card.
Explanation of the status icons
Item Function Description
1 SD card indicator Photos will be stored in micro SD card
2 Battery Indicator
Battery is full
3 Format JPG/PDF
4 Counting Indicator Show scanned fi les in micro SD card
5 Selected resolution HI:900 dpi / MI: 600dpi / LO:300 dpi
Using the scanner
Installing the battery
1. Open the battery door.
2. Insert 2xAA alkaline batteries into
the battery compartment.
3. Turn on the scanner by pressing the [POWER]
button for 2 seconds.
Inserting a micro SD memory card (not Included)
You must insert a micro SD Card (not supplied) to record and store your pictures.
Inserting the micro SD memory card:
1. Turn OFF the scanner.
2. Insert the micro SD card into
the micro SD card slot, gently press
in until card is latched.
Note: Do not force the card into the slot; forcing
may damage scanner and the micro SD memory card.
Align micro SD card position (as marked) and try again.
The micro SD memory card must be formatted before scanning.
See the following instruction.
Formatting the micro SD memory card
1. Insert a new micro SD card Into the scanner, then turn on the scanner.
2. Press the format button into format mode. "F" shows on the LCD.
3. Press the Power/Scan button to start formatting the micro SD card.
4. SD card indicator will blink until format is complete.
Date and time setting
1. Press TIME SET button (located next to USB socket)
2. LCD screen will show 1 XX, use buttons JPG/PDF and DPI to increase/decrease values.
3. Press SCAN button to confi rm and set next value.
4. Date and time values are shown in the following order:
1 XX year, 2 XX month, 3 XX day, 4 XX hour, 5 XX minute
5. Once all values are entered press TIME SET button again to exit.
Empty battery
Setting the resolution
Press the [DPI] button to select High/Medium/Low resolution.
HI/MI/LO resolution icon will be dlsplayed on status LCD.
Setting the scan mode
Press the [JPG/PDF] button to select JPG/PDF mode,
JPG/PDF icon will be displayed on status LCD.
How to scan
Hold the document fi rmly by one hand.
Place the scanner on the start-scanning position.
Hold the scanner tight and press the scan button once.
Slide the scanner slowly and keep your hand stable to get the best quality picture.
Press again to stop scanning.
Connect to computer
You may also connect your scanner to your computer and view pictures on the
computer monitor.
Specifi cation
Image sensor A4 Color Contact Image Sensor
Number of sensor 5136 dots (1st~5104 dots available)
Resolution Low resolution: 300x300 dpi (default), Medium resolution:
600x600 dpi, High resolution: 900x900 dpi
Maximum scanning speed for A4 Color High resolution
size document Color Medium resolution
Color Low resolution
Capacity (Based on 1GB micro SD 900 dpi color
card. Scan A4 size fi le, the quan- 600 dpi color
tity of scans varies depending on 300 dpi color
the content complexity)
Scan width 8.27"
Scan length High: 35"; Medium: 45"; Low: 98"
File format JPG(default)/PDF
LCD Scanning status display
Auto Power Off 3 Minutes
USB Port USB 2.0 high speed
External memory micro SD Card
Standard Battery 2xAA alkaline batteries
Computer system minimum requirement
Windows XP SP2/Vista and Mac OS 10.4 or above (direct plug-in, driver instal-
lation not required) Pentium III or above
Troubleshooting
Problem Cause
Cannot turn on the scanner 1. Low battery power
2. Battery not
inserted properly
Pictures cannot be saved 1. micro SD card has
when you are scanning them not been installed
2. Memory is full
3. The micro SD card
has not been
formatted properly
Computer does not recognize Connection failure
your scanner when connected.
(You cannot fi nd removable disk)
The battery life is very short Use wrong type of
battery
Blurry images The lens of scanner
is dirty
ERR. LED is on when scanning Scanning speed is
a document too fast
MT4090
Instructions Manual
12 Seconds
8 Seconds
3 Seconds
110 Photos (Min.)
250 Photos (Min.)
850 Photos (Min.)
RAM: 256MB Interface: USB port
Solution
Replace or install the battery
correctly
1. Install micro SD card
2. Download the pictures from
the scanner to the computer
to create storage space
3. Please refer to section about
formatting
Make sure all cable connections
are secured. Restart the
computer if necessary
Replace with new 2xAA alkaline
batteries
Clean the lens with soft dry cloth
Press the Power/Scan button to
reset and scan again the document
EN