Parts Description; Cleaning And Maintenance - Kiwi KSD 9922 Bedienungsanleitung

PARTS DESCRIPTION

1. Lid
2. Soap container
3. Sensor
4. Spout
5. On/Off switch
6. Battery compartment
Technical Data:
Battery: 4x1.5V
(direct current) AAA LR03
Capacity: 330 ml.
Soap and batteries not included.
USE
Make sure the soap container is empty and the ON / OFF switch in the OFF position. Be sure to
install the batteries the correct way (polarity). Fill the soap container with soap up to the Max.
mark. Make sure soap does not get into the battery compartment or inside the product. This
could damage the product. Reattach the cover and close tight.
Slide the ON / OFF switch to the "I" (ON) position to turn the product on.
Place the product on a solid, level and non-slip surface. Hold your hand between the two
sensors and the spout to dispense soap into your hand. A white status light will come on in
the soap container while dispensing soap. As soon as you remove your hand the status light
will automatically go of. If the product has just been filled, repeat the process until soap is
dispensed from the spout .

CLEANING AND MAINTENANCE

• Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, ascouring
pad or steel wool, which damages the device.
• Never immerse the electrical device in water or any other liquid. The device is not
dishwasher proof.
GUIDELINES FOR PROTECTION OF THE ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must be
taken to a central point for the recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your attention to this important issue. The
materials used in this appliance can be recycled. By recycling used domestic appliances you contribute
to foment the protection of our environment. Ask your local authorities for information regarding the
point of recollection.
KSD 9922 User Manual
3