Introduction; List Of Equipment Received - Ametek JOFRA ITC-155 A Bedienungsanleitung

1.0

Introduction

ITC-calibrators are temperature calibrators designed to calibrate
temperature sensors and temperature switches.
Read this manual carefully before using the instrument and make
sure that all safety instructions and warnings are observed.
1.1

List of equipment received

When you receive the instrument, the following should be enclosed:
• 1 calibrator
• 1 mains cable
• 1 set of test cables (1 black, 1 red)
• 1 insertion tube for 6 mm sensors
• 1 tool for insertion tube
• 1 traceable certificate
• 1 reference manual
• 1 user manual
• RS232 serial cable
• 1 CD-ROM containing software package "AmeCal Temperature"
(The adjustment software "AmeTrim" is not applicable to the ITC-
calibrators)
ENGLISH 2/12