Herunterladen Diese Seite drucken

Nimbus R 49-Serie Montage

Aufbaugehäuse mit betriebstechnik

Werbung

MODUL R 49 SERIE
Aufbaugehäuse mit Betriebstechnik
MONTAGE /
Vor der Montage
bitte den Metall-
ring abnehmen !
Before mounting
please detach
the metal ring !
Weite der Langlöcher: 5,5 mm
nutzbare Länge: 10 mm
width of slotted holes: 5,5 mm
usable length: 10 mm
Nimbus Group GmbH
Sieglestraße 41 D-70469 Stuttgart Tel +49 - 711 - 633014-0 Fax +49 - 711 - 633014-14
/ surface-mounted housing with operating devices
MOUNTING
Ø 135 mm
Deckenauslass stromlos schalten !
Die mitgelieferten Silikonschläuche auf
die Länge X kürzen und jeweils einen
über die Einzeladern N und L schieben.
Eventuell vorhandenen Schutzleiter
isolieren und im Aufbaugehäuse unter-
bringen !
Disconnect ceiling outlet from mains !
Shorten the silicone sleeves supplied
to a length of X and place one over
the individual wires marked N and L.
Insulate possible PE-wire and place it
inside the surface-mounted housing !
PE = grün-gelb /
N = blau /
L = braun /
Der elektrische Anschluß darf nur
vom Fachmann ausgeführt werden !
Must be installed by a qualified
electrician only !
1
2
Geeignete Dübel und
Schrauben verwenden !
Use suitable wall plugs
and screws !
3
4
green-yellow
blue
brown
Montage und Betrieb
nur in Innenräumen !
Mounting and use of
luminaire only indoors !
www.nimbus-group.com
DE 01/19
PE
N
L
Seite 1

Werbung

loading

Inhaltszusammenfassung für Nimbus R 49-Serie

  • Seite 1 ! luminaire only indoors ! width of slotted holes: 5,5 mm usable length: 10 mm Nimbus Group GmbH Sieglestraße 41 D-70469 Stuttgart Tel +49 - 711 - 633014-0 Fax +49 - 711 - 633014-14 www.nimbus-group.com DE 01/19 Seite 1...
  • Seite 2 100 kilo-ohms) 1-10 V 24 V DC zum Leuchtenkopf 24 V DC to luminaire head Nimbus Group GmbH Sieglestraße 41 D-70469 Stuttgart Tel +49 - 711 - 633014-0 Fax +49 - 711 - 633014-14 www.nimbus-group.com DE 01/19...
  • Seite 3 DC operation supplied by an on-site 24 V DC zum Leuchtenkopf emergency power system 24 V DC to luminaire head Nimbus Group GmbH Sieglestraße 41 D-70469 Stuttgart Tel +49 - 711 - 633014-0 Fax +49 - 711 - 633014-14 www.nimbus-group.com DE 01/19...
  • Seite 4 Aufbaugehäuse montiert. After wiring duct the 24 V supply cables through the mounting ring and re-attach it to the housing. Nimbus Group GmbH Sieglestraße 41 D-70469 Stuttgart Tel +49 - 711 - 633014-0 Fax +49 - 711 - 633014-14 www.nimbus-group.com...
  • Seite 5 Schutzart IP 20 protection degree IP 20 Exakte Leistungsdaten siehe Typenschild ! Exact performance data see rating label ! Nimbus Group GmbH Sieglestraße 41 D-70469 Stuttgart Tel +49 - 711 - 633014-0 Fax +49 - 711 - 633014-14 www.nimbus-group.com DE 01/19...
  • Seite 6: Abmessungen

    Länge: 10 mm width of slotted holes: 5,5 mm usable length: 10 mm 10 mm Ø 135 mm Nimbus Group GmbH Sieglestraße 41 D-70469 Stuttgart Tel +49 - 711 - 633014-0 Fax +49 - 711 - 633014-14 www.nimbus-group.com DE 01/19 Seite 6...