Connections; Cleaning And Maintenance; Technical Specifications - Omnitronic HS-100 XLR Bedienungsanleitung

5. CONNECTIONS

6. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

7. TECHNICAL SPECIFICATIONS

Type: Uni-directional condenser headset microphone
Directivity pattern: Cardioid directivity pattern
Sensitivity: -66 dB (+/- 4 dB)
Frequency response: 100 - 15,000 Hz
Operation voltage: 1.5 V - 10 V
Current consumption: approx. 0.5 mA
Cable-length: approx. 1 m
Connection: via 3-pole mini-XLR-plug
Dimensions: 250 x 120 x 150 mm
Weight: 40 g
Please note: Every information is subject to change without prior notice. 08.09.2003 ©
1) Insert the microphone arm in the suspension on the wireframe.
2) Place the headset wireframe around the head so that the wireframe is
horizontal across the back of the head and the ends of the wireframe fit
over and in front of the ears.
3) For maximum gain before feedback, position the gooseneck so that
the microphone grille is within 25 mm (1 inch) of the left corner of the
mouth. Do NOT position it directly in front of the mouth.
4) Connect the connection-cable with the pocket transmitter.
5) If breath noise or "pop noise" is audible over the sound system, install
the supplied windscreen.
8/14 13056010_V_1_1.DOC