Funktionskontrolle ................8 Schnittdaten für SOLO HM Messer.............9 Programmierhinweise................10 List of contents Tool description ...................1 Tool selection ..................4 Change the blade ................5 Change of blade control and blade housing........6 Tool function..................8 Cutting data for SOLO carbide blades ..........9 Programming information ..............10...
Das Werkzeug ist einsatzbereit. The tool is now ready to use. SOLO2 technische Änderungen vorbehalten / subject to technical changes SOLO/k Seite / Page 8 V4.0 HEULE WERKZEUG AG / Tel.: +41-71 / 726 38 38 / Fax: +41-71 / 726 38 39...
They can be adjusted both upwards and ten hin angepasst werden. downwards. technische Änderungen vorbehalten / subject to technical changes SOLO/k V4.0 Seite / Page 9 HEULE WERKZEUG AG / Tel.: +41-71 / 726 38 38 / Fax: +41-71 / 726 38 39...
ER (blade re- tracted; speed rate: 0) technische Änderungen vorbehalten / subject to technical changes SOLO/k Seite / Page 10 V4.0 HEULE WERKZEUG AG / Tel.: +41-71 / 726 38 38 / Fax: +41-71 / 726 38 39...
Seite 13
AR and machining workpiece in ER (blade speed rate. retracted) technische Änderungen vorbehalten / subject to technical changes SOLO/k V4.0 Seite / Page 11 HEULE WERKZEUG AG / Tel.: +41-71 / 726 38 38 / Fax: +41-71 / 726 38 39...
Seite 14
One Operation. HEULE tools for front and back machining of bore edges in one single pass. Deburring Chamfering COFA SNAP SNAP GH-S DEFA Countersinking Drilling SOLO VEX-P GH-Z/E VEX-S GH-K HEULE WERKZEUG AG HEULE TOOL CORPORATION HEULE WERKZEUG AG Wegenstrasse 11 / Postfach 4722 A Interstate Drive China Rep.