Use And Operation - Klarstein 10028913 Handbuch

Before first Use
Unpack the box with care, keeping all the packaging materials until you are satisfied everything is present and
in working order. Remove all packaging and foils and store it for later use. Check if the appliance has been
delivered completely and that it is in perfect order. Before using the appliance for the first time please clean
the jug and the accessories, as described under the chapter "Cleaning and Care" to remove dust or production
residues.
Whisks and Functions
Whisk
Getting Started
1. Choose the appropriate whisk (Frothing & Heating / Heating) and set it inside the jug.(See the function abo-
ve for reference)
2. Pour the milk into the jug below the mark.(See the max capacity above for reference)
3. Insert the plug in a socket, press the button then the frother start to work and the blue light on. The frother
will stop working automatically when the temperature of the milk / milk foam reaches to around 65-70 (the
blue light off).
Caution: The frother can not be stopped or paused by pressing the button. If you cut off the power / lift the
jug form the power base, it will start working again automatically when it is power on next time. You have to
wait until the temperature of the milk / milk foam reaches to the target temperature and then the frother will
stop working.
Hints and Tips
• Use whole milk (fat content >3.0%) for best results.
• Milk heats to approximately 70 °C. This is the ideal temperature to ensure the flavor of your coffee is not
impaired and so you don't have to wait too long until you can start sipping on your drink.
• Keep the whisks in a safe place. They are small and can easily be lost.
• After frothing or heating allow 2 minutes for the thermostat to reset and the frother to be ready for use
again. To shorten this time, rinse with water and wipe dry after each use.• The frother is designed to heat and
froth milk. If you add flavorings, coffee granules or chocolate powder into the frother , ensure it is cleaned
immediately and thoroughly after using.

Use and Operation

Function
Frothing cold milk
Frothing & Heating
Heating (a small amount of froth)
Max. Capacity
150 ml
150 ml
300 ml
Time
2 min
3-4 min
4-5 min
8