Chal-Tec 10006322 Bedienungsanleitung Seite 17

External Function
Power
1. Use AC/DC power adapter
Please use the special AC/DC power adapter provided with this electronic organ or the power
adapter with DC 12V voltage and 500mA out current and with central anode. Connect the DC plug
of power adapter into the DC12V power socket in the rear of electronic organ. Then connect the
other end into main socket (see that the input voltage of power adapter conform to the voltage of
electric supply), finally turn on power switch and start performance.
Caution: When you do not use this electronic organ for a long term, you should pull out the plug of
power adapter from main socket safely to avoid possible causing trouble of part or other accident in
long term charging.
2. Use of Batteries
Open the battery lid in the bottom of electronic organ and load eight 1.5V Size D batteries. Ensuring
the polarity should conform to the direction marked on battery lid. Replace the lid after loading
batteries.
Caution: Do not use batteries of different kinds and mix new and old batteries. Low batteries will
cause low volume or poor timbre and replace batteries at that time. To avoid possible damage
caused by battery liquid leakage, please take out batteries if you will not use the electronic organ for
a long term.
Preparation before performance
1. USB Jack
2. Line Out
3. Headphone
4. DC 12V Input