Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Scooter 205
Scooter 205
Herstellerinformationen
Manufacturer information
1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für myToys Scooter 205

  • Seite 1 Scooter 205 Scooter 205 Herstellerinformationen Manufacturer information...
  • Seite 2 Aufbau: Scooter fahrbereit machen Bitte lesen Sie die Aufbauanleitung gründlich, um ein Einklemmen oder Hängenbleiben wäh- rend des Gebrauchs zu vermeiden. Es wird empfohlen, den Tragegurt vor dem Aufbau und anschließendem Fahren abzunehmen. 1. Schieben Sie den Sicherheitshebel nach oben, bis sich die Transportsicherung löst und klappen die Lenkerstange nach vorn, bis die Sicherung einrastet.
  • Seite 3 Fahranleitung Bevor Sie starten, achten Sie darauf, dass der Ständer vollständig eingeklappt ist und der Lenker sowie die Handgriffe fest montiert sind. Angetrieben wird der Scooter durch regelmäßiges Abstoßen mit dem Fuß. Problemlos ist auch das Bremsen – einfach die Hinterradfriktionsbremse (Schutzblech) heruntertreten. Abbau: Scooter zum Transport oder zur Lagerung zusammen klappen 1.
  • Seite 4: Sicherheitshinweise

    Sicherheitshinweise • Der Scooter ist nur für eine Person geeignet. • Benutzen Sie den Scooter nur auf geeigneten Flächen, die glatt, sauber, trocken und möglichst frei von anderen Verkehrsteilnehmern sein sollten. • Meiden Sie abschüssiges Gelände. • Bei Dauergebrauch kann die Bremse heiß werden! Man sollte sie vor dem Abkühlen nicht berühren.
  • Seite 5: Wartung Und Instandhaltung

    Verschleißspuren. Nehmen Sie keine baulichen Veränderungen vor! Sollten Teile beschädigt sein oder scharfe Ecken und Kanten entstanden sein, darf das Produkt nicht mehr verwendet werden! Nehmen Sie im Zweifel mit unserem Service Kontakt auf (service@myToys.de). Lagern Sie das Produkt an einem sicheren, witterungsgeschützten Ort, so dass es nicht beschädigt werden kann oder Personen verletzen kann.
  • Seite 6 Assembly: Get scooter ready for use Please, read this assembly instruction carefully, in order to prevent pinched fingers and entrap- ment during use. It is recommended to remove shoulder strap before assembly and use of the scooter. 1. Pull on the lever upwards to loosen the transportation lock. Unfold the scooter‘s handlebars upwards.
  • Seite 7: Driving Instructions

    Driving Instructions Before you begin, make sure that the stand is folded safely and the handlebars and grips are fixed. The scooter moves when a foot is used to regularly push off. Braking is no problem either – simply step on the friction brake over the back wheel (mudguard). Disassembly: Get scooter ready for transport and storage 1.
  • Seite 8: Safety Instructions

    Safety Instructions • The scooter is only intended for use by one person. • Only use the scooter on surfaces that are suitable for it, i.e. those which are flat, clean, dry, and use the scooter where possible away from other road users. Avoid sloping ground. The brakes may become hot if the scooter has been used for a while! They shouldn’t be touched until they have cooled down.
  • Seite 9: Maintenance And Care

    If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (service@ myToys.de). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.
  • Seite 10 The maximum user weight is 100 kg. Manufacturer information to be read. Keep the packaging for any possible future correspondence. Please remove all clips, binders, rubber bands, plastic bags and other packaging material before use. Hergestellt für/Manufactured for: myToys.de GmbH Potsdamer Straße 192 10783 Berlin Germany...

Inhaltsverzeichnis